Yes — every flat pack paper bedside table from MINHOU UNIMAX ships with assembly instructions. But unlike the multi-page booklets that come with conventional flat-pack furniture, these guides are typically a single illustrated sheet showing the part layout and connection sequence. The reason is simple: the furniture itself is designed as tool-free assembly furniture, which means there are no screws to sort, no bolts to tighten, and no Allen wrenches to lose under the couch. Most customers finish the full assembly in under five minutes.
This article walks through what those instructions actually contain, what you will find inside the carton, and why the assembly experience for paper bedside tables feels fundamentally different from anything you have wrestled with before.
When you open a flat-pack carton from MINHOU UNIMAX, you will find the components neatly separated and protected rather than jumbled together:
The components arrive disassembled and flat-packed in a carton, which keeps the shipping volume low and protects each part during transport. This flat-pack method is a core reason why paper furniture costs less to ship and store than conventional alternatives — the company states that its furniture weighs approximately 20% to 30% as much as traditional furniture of comparable size.
The instructions that ship with these tables are designed for clarity, not complexity. Rather than a dense booklet of numbered steps and hardware callouts, you typically receive a single visual sheet that shows three things:
Because the entire system is tool-free, there are no screw sizes to match, no bolt counts to verify, and no risk of using the wrong hardware. The 3-way and 4-way connectors are shaped differently — the 3-way joins three tubes at a corner, while the 4-way joins four — so you can identify which goes where at a glance.
Quick note: The instruction sheet also includes the published load limits for that specific model. MINHOU UNIMAX states that selected structures can support an adult weighing up to 80 kg and that bookshelves can carry a total load of 50 kg. For bedside tables, the recommended load is lower and varies by model — always check the sheet rather than guessing.
While the exact sequence varies by model, here is what you can expect when assembling a typical paper bedside table:
Open the carton and lay out all components on a flat surface. Cross-reference them against the part list on the instruction sheet. If anything is missing or damaged, contact the company before proceeding — the connectors and tubes are precision-cut, so substitutes will not work.
Start by connecting the vertical paper tubes to the horizontal ones using the 3-way connectors at the corners. The tubes slide into the connector prongs and lock with a firm push — you will feel resistance give way when the joint seats properly. No glue, no screws, no tools. The 4-way connectors go at any intersection where four tubes meet.
Once the frame is standing, slot the reinforced paper panels into position. On models with drawers — such as the UM24015 Paper Bedside Dresser with its two paper drawers — the drawer panels fold and slot into pre-formed grooves. On open-shelf models like the UM24058 Night Stand with Door and Open Shelf, the door panel hinges into place using integrated paper tabs, with no separate hardware.
Slide the plastic foot covers onto the bottom of each leg. These serve two purposes: they keep the paper tubes off the floor to prevent moisture wicking, and they add a small buffer that prevents scratching on hard flooring. For models with universal wheels — like the UM24023A Paper Storage Container with Paper Drawers and Universal Wheels — the casters ｒｅｐｌａｃｅ the standard foot covers and snap into the same leg ports.
Give the assembled table a gentle press on each corner. If anything shifts, check that the connectors are fully seated. The system is designed for repeated assembly and disassembly, so re-seating a joint is as simple as pulling it apart and pushing it back in. The company highlights its patented three-way and multi-prong connector systems as a key feature for improving load distribution and enabling repeated use.
If you have ever assembled a conventional flat-pack nightstand, you know the common pain points: confusing diagrams, hardware bags labeled with cryptic codes, and that one piece left over at the end that you are not sure where it goes. The comparison below shows how paper furniture changes the equation:
| Aspect | Traditional Flat Pack | Paper Bedside Table |
|---|---|---|
| Tools required | Screwdriver, Allen wrench, sometimes a hammer | None |
| Instruction format | Multi-page booklet with dense diagrams and hardware codes | Single illustrated page with part layout and sequence |
| Hardware pieces | Dozens of small parts (screws, bolts, cams, dowels) | A handful of connectors (3-way and 4-way) |
| Disassembly | Difficult without stripping screws or damaging panels | Designed for repeated assembly and disassembly |
| Package weight | 15 to 25 kg for a comparable nightstand | Significantly lighter — roughly 20% to 30% of traditional weight |
The difference comes down to the connector system. MINHOU UNIMAX uses patented multi-prong connectors that distribute load across several contact points rather than relying on a single screw. This means fewer parts, fewer failure points, and a far simpler instruction sheet.
Each model in the bedside table lineup has slightly different assembly requirements, though the core process — frame, panels, foot covers — stays the same across the range:
Across all models, the flat pack paper bedside table category shares the same connector standard, so once you have assembled one, the process is familiar for the rest of the product line.
If your carton arrives without an instruction sheet — rare, but possible during shipping — you have a few practical options:
The modular design is forgiving enough that most customers can assemble the table by identifying the connector types and matching tube lengths to frame positions, even without the printed sheet.
The brevity of the instruction sheet is not a cost-cutting shortcut — it reflects a deliberate design philosophy. Traditional flat-pack furniture was optimized for shipping efficiency, not user experience. The instruction complexity is a side effect of compressing a joint system built around screws, cams, and dowels into a flat box.
Paper furniture flips that equation. The connector system itself is the product of the design — the tubes, panels, and connectors are engineered to work together without intermediate hardware. The result is an instruction sheet that fits on one page because the assembly process genuinely is that straightforward.
For renters who move frequently, students setting up dorm rooms, or anyone who has spent an hour deciphering a traditional furniture manual, that single page of instructions represents a meaningful shift in how furniture can work for the people who use it. The company positions its products as best suited for light-use, storage, decorative, and flexible-space applications — and the simple assembly process is a core part of that flexibility.
So to answer the original question: yes, flat pack paper bedside tables include assembly instructions. They are concise, visual, and designed to get you from flat-pack carton to finished nightstand in minutes — not hours.
Hey there! Your message matters! It'll go straight into our CRM system. Expect a one-on-one reply from our CS within 7×24 hours. We value your feedback. Fill in the box and share your thoughts!